TASCAM Portacapture X6 Owners Manual - Page 12
Procedure 4: Start recording, Procedure 3: Set the mixer, Press the REC
View all TASCAM Portacapture X6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Tap MIC or numbers 3 to 4 to turn the recording tracks on/off. Procedure 3: Set the mixer 1. Tap MIXER at the right of the screen to open the MIXER screen. Procedure 4: Start recording 1. Press the REC [0] button on the unit to start recording. Gain level Input setting Recording track on/off status Tracks shown with red backgrounds will be recorded. 4. Slide the track GAIN faders to adjust their input levels. 2. Slide the faders of each track to adjust the balance of levels sent to the MASTER. MASTER level setting PAN setting Fader While watching the level meters, adjust the GAIN faders until the highest that the meters reach is about −12 dB. NOTE If the input level exceeds -2 dB, the PEAK indicator on the unit will light. MASTER level o If an input level is too low the recorded sound will be quiet, but if it is too high the sound will be distorted (or break up). When recording starts, the REC indicator will become lit. 2. Press the HOME [8] button on the unit to stop recording. When recording stops, the REC indicator will become unlit. 12 TASCAM Portacapture X6