TASCAM Portacapture X6 Owners Manual - Page 16
Precautions for placement and use, Beware of condensation, Cleaning the unit
View all TASCAM Portacapture X6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
The built-in speaker volume is low o Press the + side of the volume control. (headphone/speaker) o If input levels were low during recording, it might be difficult to hear even when the speaker is at its maximum volume. If the maximum input level during recording is close to 0 dB, the built-in speaker will output at near maximum volume o If more volume is needed, connect an external speaker with a built-in amp or an amp with a speaker connected to it. The date/time is incorrect o The date and time setting can be changed using the GENERAL SETTING screen > SYSTEM page > DATE/TIME item. (See "GENERAL SETTINGS screen" on page 13) 16 TASCAM Portacapture X6 Precautions for placement and use o The operating temperature range of this unit is 0-40 °C. o Do not install this unit in the following types of locations. Doing so could degrade the sound quality and/or cause malfunctions. i Places with significant vibrations i Next to a window or in another location exposed to direct sunlight i Near heaters or other extremely hot places i Extremely cold places i Very humid or poorly ventilated places i Very dusty places i Places exposed directly to rain or other water o If this unit is placed near a power amplifier or other device with a large transformer, it could cause a hum. If this occurs, increase the distance between this unit and the other device. o This unit could cause color irregularities on a TV screen or noise from a radio if used nearby. If this occurs, use this unit farther away. o This unit might produce noise if a mobile phone or other wireless device is used nearby to make calls or send or receive signals. If this occurs, increase the distance between this unit and those devices, put them into airplane mode or turn them off. o Do not place this unit on top of a power amplifier or other device that generates heat. Beware of condensation Condensation could occur if the unit is moved from a cold place to a warm place, it is used immediately after a cold room has been heated or it is otherwise exposed to a sudden temperature change. To prevent this, or if this occurs, let the unit sit for one or two hours at the new room temperature before using it. Cleaning the unit Use a dry soft cloth to wipe the unit clean. Do not wipe with chemical cleaning cloths, thinner, alcohol or other chemical agents. Doing so could damage the surface or cause discoloration. About TASCAM customer support service TASCAM products are supported and warrantied only in their country/region of purchase. To receive support after purchase, on the TASCAM Distributors list page of the TEAC Global Site (https://teac-global.com/), search for the local company or representative for the region where you purchased the product and contact that organization. When making inquiries, the address (URL) of the shop or web shop where it was purchased and the purchase date are required. Moreover, the warranty card and proof of purchase might also be necessary.