TASCAM RC-F82 owners manual - Page 12

4 - Mixer Control Functions This unit has rotary controls and faders for 8 channels. The knobs can be used to adjust one of three parameters: the microphone input level (TRIM), the stereo position sent to the stereo bus (PAN) or the level sent to the stereo bus (LEVEL). The faders can be used to adjust one of two parameters: microphone input (TRIM) or the level sent to the stereo bus (LEVEL). To set this, use the Volume Fader Mode item on the RC-F82 page of the HS-P82. You cannot, however, set the knobs and faders to have the same functions. To open the RC-F82 page on the HS-P82 unit, press this unit's REMOTE SETUP [F4] key or follow the procedures below. 1 Press the MENU key on the HS-P82 unit to open the MENU screen. 2 Press the REMOTE SETUP button to open the REMOTE SETUP screen. 3 Touch the RC-F82 tab to open its page. PAN (stereo positions sent to the stereo bus) Choose this setting to set the left-right stereo position sent to the stereo bus. Turn it all the way to the left to send the signal completely to the left channel. Turn it all the way to the right to send the signal completely to the right channel. Send it to the center to send the signal equally to both left and right channels. This has the same function as the PAN knob on the PAN/ LVL page that opens when you touch the PAN/LVL button on the Home Screen and on the CHx SETUP screens (channel setting screens where "x" is the channel number) of the HS-P82 unit. Kob setting Fader setting 4 Select a button shown next to the Volume Fader Mode item. The top line of each button shows the knob setting, and the bottom line shows the fader setting. Button label TRIM PAN LEVEL Function Microphone input level Stereo position sent to the stereo bus Level sent to stereo bus Knob functions Knobs can be set to one of three functions. The current setting can be confirmed by viewing the VOLUME MODE indicators. TRIM (microphone input) Choose this setting to adjust the microphone input level. When you change the setting, the track name display area below the meters shows the gain value for a while. This has the same function as the input trim knobs on the front panel of the HS-P82 unit. 12 TASCAM RC-F82 PAN/LVL page of the Home Screen Channel setting screen LEVEL (level sent to the stereo bus) Choose this setting to adjust the level sent to the stereo bus. This has the same function as the 2Mix LVL knob on the PAN/LVL page that opens when you touch the PAN/LVL button on the Home Screen and on the CHx SETUP screens (channel setting screens where "x" is the channel number) of the HS-P82 unit. Adjust it in a range from -∞ when turned all the way to the left and +10 dB when turned all the way to the right. CAUTION The same adjustments can be made using both this unit and the HS-P82. The adjustments made most recently will be used, regardless of which unit they were made with. For this reason, if you make an adjustment using