TASCAM RC-F82 owners manual - Page 7
VOLUME MODE indicators TRIM, PAN, LEVEL
![]() |
View all TASCAM RC-F82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 - Names and Functions of Parts 5 REMOTE SETUP [F4] key Press this key to open the RC-F82 page of the REMOTE SETUP screen on the HS-P82's color display. Press this key while pressing the SHIFT key to use it as the [F4] function key. Make function key settings on the RC-F82 page of the REMOTE SETUP screen of the HS-P82 unit. 6 Built-in microphone Use this microphone for talkback. Press and hold the TALKBACK key to activate it. The TO LINE OUT 2 switch must be set to ON in order to output the signal through the LINE OUT 2/ TALKBACK connectors. 7 FADER MODE indicators (TRIM, LEVEL) These two indicators show the currently enabled fader function. TRIM indicates control over the microphone input levels, and LEVEL indicates control over the levels sent to the stereo bus. 8 VOLUME MODE indicators (TRIM, PAN, LEVEL) These three indicators show the currently enabled volume knob function. TRIM indicates control over the microphone input levels, PAN indicates control over the stereo positions used in output to the stereo bus, and LEVEL indicates control over the levels sent to the stereo bus. 9 SEL [REC] keys (CH1-CH8) Press one of these keys to open the channel setting (CHx SETUP) page for the corresponding channel on the HS-P82's color display. While pressing and holding the SHIFT key, press this key to enable/disable recording for the corresponding channel. 0 SOLO [MUTE] keys (CH1-CH8) Press one of these keys to enable/disable soloing of that channel. While pressing and holding the SHIFT key, press this key to enable/disable record muting of that channel. q Rotary encoder knobs (CH1-CH8) Use one of these knobs to adjust the microphone input level (TRIM), stereo position sent to the stereo bus (PAN) or level sent to the stereo bus (LEVEL). To set the functions of these knobs, select the Volume Fader Mode item on the RC-F82 page of the REMOTE SETUP screen on the HS-P82 unit. The current setting can be checked with the VOLUME MODE indicators. CAUTION The same adjustments can be made using both this unit and the HS-P82. The adjustments made most recently will be used, regardless of which unit they were made with. For this reason, if you make an adjustment using the HS-P82 unit, the setting will differ from that last made using controls on this unit. w Channel faders (CH1-CH8) Use one of these faders to adjust the microphone input (TRIM) or the level sent to the stereo bus (LEVEL) for the corresponding channel. To set the functions of these knobs, select the Volume Fader Mode item on the RC-F82 page of the REMOTE SETUP screen on the HS-P82 unit. The current setting can be checked with the FADER MODE indicators. CAUTION The same adjustments can be made using both this unit and the HS-P82. The adjustments made most recently will be used, regardless of which unit they were made with. For this reason, if you make an adjustment using the HS-P82 unit, the setting will differ from that last made using controls on this unit. e RETURN IN knob The left knob (1) adjusts the input level from the RETURN IN 1 connector, and the right knob (2) adjusts the input level from the RETURN IN 2 connector. r RETURN IN SOLO keys/indicators (2) Press the left key to enable/disable soloing of the signal input from the RETURN IN 1 connector, and use the right key to enable/disable soloing of the signal input from the RETURN IN 2 connector. When SOLO is on, the indicator above and to the left of the button lights. t PHONES knob Use this knob to adjust the volume output from the PHONES jack. Both left and right channels are adjusted simultaneously. CAUTION Before connecting headphones, turn the PHONES knob to the minimum volume. Failure to do so could cause sudden loud noises to occur, which might damage your hearing or equipment. y L/R MONO keys/indicators Use these keys to turn ON/OFF the mono function for the left and right channels of the PHONES connector outputs. The L MONO key turns the mono function ON/OFF for the left channel, and R MONO key controls the right channel. When ON for a channel, the indicator above and to the left of the corresponding key lights. u TO LINE OUT 2 switch (TALKBACK) When this switch is set to ON, the talkback signal is output from the LINE OUT 2/TALKBACK connectors. When OFF, the signals from the LINE IN connectors are output from them. i TALKBACK key Press this key to enable talkback using the built-in microphone. When the TO LINE OUT 2 switch is ON, the signal input through the built-in mic is output from the LINE OUT 2/TALKBACK connectors. 7 TASCAM RC-F82
![](/manual_guide/products/tascam-rcf82-owners-manual-84d234a/7.png)