TASCAM RC-F82 owners manual - Page 9

Rear panel 2 - Names and Functions of Parts l LINE IN connectors (left and right) These are balanced XLR analog input connectors (1: GND, 2: HOT, 3: COLD). Connect them with the HS-P82 LINE OUT connectors. ; LINE OUT 1 connectors (left and right) These are balanced XLR analog output connectors (1: GND, 2: HOT, 3: COLD). The signals input through the LINE IN connectors (left and right) are passed through and output from these. z LINE OUT 2/TALKBACK connectors These are balanced XLR (left and right) analog output connectors (1: GND, 2: HOT, 3: COLD). When the TO LINE OUT 2 switch is set to OFF, the signal input through the LINE IN connectors are passed through and output from these. When the TO LINE OUT 2 switch is set to ON, the talkback signal is output from these connectors. x RETURN IN connectors (1/2) These are balanced XLR analog input connectors (1: GND, 2: HOT, 3: COLD). Use these connectors for the input of talkback signals. The signals input through these connectors are mixed in the analog domain with the signal input through the PHONES IN jack and then the mix is output through the PHONES jack. c PHONES IN jack This standard stereo phone jack is an analog input connector. Connect it to the PHONES jack of the HS-P82 unit. The signal input through this connector is mixed in the analog domain with the signals input through the RETURN IN connectors and then the mix is output through the PHONES jack. Front panel v PHONES jack Use this standard stereo phone jack to connect headphones. Use the PHONES knob on the top panel to adjust the headphones output level. CAUTION Before connecting headphones, turn the PHONES knob to the minimum volume. Failure to do so could cause sudden loud noises to occur, which might damage your hearing or equipment. 9 TASCAM RC-F82