TEAC CDW54E User Manual - Page 7
English
View all TEAC CDW54E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH (c) Avoid vibration or impact. During recording or playing, son't subject the drive to vibration or impact. Vibration or impact especially during recording can result in poor recording. The following problems also can occasionally result: - The disk becomes defective because of faulty recording, and cannot be played back. - Additional recording cannot be made because of faulty previous recording. (d) Data protection Recording may not be completed normally in some cases due to a malfunction of the drive, a defective medium, etc. Therefore, use the following precautions. - Be sure to confirm the recording status by playing back the newly recorded data after completing the recording operation. - Be sure to store the source file from which the data is recorded until the recording is confirmed. - Do not repair the drive or replace a part of the drive under circumstances other than designated assurance conditions. Cleaning and maintenance of your TEAC CD-RW drive TEAC CD-RW drive will not need maintenance if used as specified in this manual. Usually there are only problems with dirty or defective CDs. Important: Do not use cleaning CDs which will remove dirt of the lense of the laser aided by a little brush. Do not clean the inner parts of your TEAC CD-RW drive with compressed air. Any of these methods may cause damage to your TEAC CD-RW drive. 30 3. Precautions for Installation and Operation