TEAC GF450K7 Owners Manual - Page 17

Listening to a CD 1 1 5 1 Press the CD button. 3 24 4 Press the OPEN/CLOSE button (L) to close the tray. "--" blinks for a few seconds. When no disc is set, "nOdISC" appears on the display. 2 Press the OPEN/CLOSE button (L). < It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 3 Place a disc on the tray with the printed label face up. < Never place more than one disc on the tray. < The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. total number of the tracks total play time of the disc < The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: Unreadable disc < When a non-music CD is inserted, its contents may be detected and playback may start. However, no sound is generated. 5 Press the PLAY button (y) to start playback. Disc playback starts from the first track, and the PLAY indicator (y) lights on the display. < If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts. 17