TEAC GF450K7 Owners Manual - Page 23

Recording, 20db, -30db or -40db AUTO REC

Get TEAC GF450K7 PDF manuals and user guides View all TEAC GF450K7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Recording 1 1 3 Select the mode of track number assignment using the MANUAL/AUTO REC button of the remote control unit. 22 Audio from the PHONO/TAPE (cassette tapes)/AUX sources can be recorded on the CD recorder. 1 Press the PHONO/TAPE/AUX button once or twice to select the source to be recorded. When the MANUAL/AUTO REC button is pressed once, the current mode is displayed. Press the MANUAL/AUTO REC button repeatedly to select any other mode. - - (MANUAL) Track numbers are not given automatically. Use the TRACK INCREMENT button to divide tracks. MANUAL is recommended for recording an analog source such as a record. To record a record or cassette tape, select PHONO/TAPE and set the Input Selecting switch by the turntable to the desired source. To record an external source connected to the AUX IN jacks, select AUX. 2 Load a recordable CD-R or CD-RW disc into the unit. -20db, -30db or -40db (AUTO REC) The unit will automatically insert a track division in the recorded material when the sound level has dropped below the threshold for more than 2 seconds, and sound has re-started. "-20db" takes a louder signal to trigger the track increment. "-40db" means that a relatively quiet signal will trigger the track increment. "-40db" is suitable for recording a noiseless source such as a CD. < AUTO REC may not work properly with analog sources that contain low-level noises. < The AUTO TRACK indicator lights when -20dB, -30dB or -40dB is selected. < The default setting is MANUAL (off). When the unit is turned on, the setting is automatically reset to MANUAL (off). Press the POWER button or FM/AM button to reset the setting to "MANUAL." < The MANUAL/AUTO REC button doesn't work during recording or in the record pause mode. Switching is disabled immediately after a disc is placed. Switch after "NO TOC" is displayed. Press the OPEN/CLOSE button (L), place a disc on the disc tray with the printed label side up, and then press the OPEN/CLOSE button (L) to close the disc tray. Make sure "NO TOC" and "CD-R" (or "CD-RW") indicators lights on the display, or the RECORD button in step 4 will not work. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
23
Recording 1
Audio from the PHONO/TAPE (cassette tapes)/AUX sources
can be recorded on the CD recorder.
1
Press the PHONO/TAPE/AUX button once or twice to select
the source to be recorded.
To record a record or cassette tape, select PHONO/TAPE and set
the Input Selecting switch by the turntable to the desired source.
To record an external source connected to the AUX IN jacks,
select AUX.
2
Load a recordable CD-R or CD-RW disc into the unit.
Press the OPEN/CLOSE button (
L
), place a disc on the disc tray
with the printed label side up, and then press the OPEN/CLOSE
button (
L
) to close the disc tray.
Make sure “NO TOC” and “CD-R” (or “CD-RW”) indicators lights on
the display, or the RECORD button in step
4
will not work.
2
2
1
When the MANUAL/AUTO REC button is pressed once, the
current mode is displayed. Press the MANUAL/AUTO REC button
repeatedly to select any other mode.
– – (MANUAL)
Track numbers are not given automatically.
Use the TRACK INCREMENT button to divide tracks.
MANUAL is recommended for recording an analog source such
as a record.
–20db, –30db or –40db (AUTO REC)
The unit will automatically insert a track division in the recorded
material when the sound level has dropped below the threshold
for more than 2 seconds, and sound has re-started.
“–20db” takes a louder signal to trigger the track increment.
“–40db” means that a relatively quiet signal will trigger the track
increment. “–40db” is suitable for recording a noiseless source
such as a CD.
<
AUTO REC may not work properly with analog sources that
contain low-level noises.
<
The AUTO TRACK indicator lights when –20dB, –30dB or –40dB is
selected.
<
The default setting is MANUAL (off). When the unit is turned on,
the setting is automatically reset to MANUAL (off).
Press the POWER button or FM/AM button to reset the setting to
“MANUAL.”
<
The MANUAL/AUTO REC button doesn’t work during recording
or in the record pause mode.
Switching is disabled immediately after a disc is placed. Switch
after “NO TOC” is displayed.
3
Select the mode of track number assignment using the
MANUAL/AUTO REC button of the remote control unit.