TEAC HD-1 HD-1 Manual - Page 19
Troubleshooting - radio hd function not working
View all TEAC HD-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH Troubleshooting If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General The unit does not turn on. The AC plug may not be connected properly. Check the connection. The wall outlet may not function. Try another outlet. When playing music, the sound gets distorted. The volume level on the connected device or the HD-1 is set too high. Decrease the volume until the distortion has disappeared. The source sound is distorted. If the original sound source (MP3) on your iPod is poor quality, the distortion and noises are easily noticed with high-power speakers. The remote control does not operate properly. The installed battery is weak. Replace with a new battery. It is not aimed to the HD-1 or too far away from it. Move within 20 feet of the unit and point the remote control toward the HD-1. Remote functions like play/pause skip up, skip down does not work Depending on the device these functions might be disabled due to differences in software. Please refer to owner's manual of the device you are using. iPod or iPhone Player Your iPod or iPhone does not fit into the built-in universal dock. The installed dock adapter is not the correct one. Check whether a correct dock adapter is installed. There might be some obstructions on the dock. Check whether there are any obstructions on the connector and on the dock. If everything is secured, place your iPod back into the dock. It does not recognize your iPod or Phone when docked. Your iPod or iPhone may not be properly docked. Take your iPod or iPhone out of the dock, and remove any obstructions on the connector from the dock and on your iPod or iPhone. Place your iPod or iPhone back into the dock. Your iPod or iPhone is frozen or locked up. Check whether your iPod or iPhone operates correctly before placing it back into the dock. Please refer to the owner's instruction manual of your iPod or iPhone. The software of your iPod or iPhone is outdated. Upgrade the software on your iPod or iPhone. For the details on how to upgrade the software on your iPod or iPhone, please visit Apple's website: http://www.apple.com. Your iPod or iPhone is not charged even though it is in the dock. Your iPod or iPhone might not be properly docked. Take your iPod or iPhone out of the dock, and remove any obstructions on the connector from the dock and on your iPod or iPhone. Place your iPod or iPhone back into the dock. Your iPod or iPhone is frozen or locked up. Check whether your iPod or iPhone operates correctly before placing it back into the dock. Please refer to the owner's instruction manual of your iPod or iPhone. Your iPod or iPhone will not be charged in Radio mode to avoid major radio interference. Tuner AM band is too noisy. The reception at the set location is poor. Rotate the AM loop antenna position for best reception. Move the antenna away from the unit to avoid interference. FM band is too noisy. The reception at the set location is poor. Check that the FM antenna is properly connected to the jack in the rear of the unit. Stretch the antenna to a "T" shape and move slightly closer to a window. 19