TEAC HD-P2 HD-P2 Owner's Manual - Page 25

Docking and Conforming FireWire Dock When the HD-P2 is connected to a host computer supported by Windows XP or Mac OS 10.3 via FireWire, this Main Menu item is enabled and can be used to dock the HD-P2 to the host computer. The HD-P2, when docked, shows up on the host com- Figure 34 - FireWire Docked Screen Compact Flash Card Layout Figure 35 is an example of a typical CF card with two Projects as seen from a Macintosh OS X computer: Note that Project PROJ0001 and all its files use default system names. The other Project (PressConf) has been renamed, as have the active audio files. The HD-P2 automatically takes care of organizing the file system. When docked to a host computer, or when using a CF card reader, you can refer to this organization chart to find and copy the audio files to your DAW. If you have custom settings that you use all of the time, turn them into a Project Template (.tpt extension) which allows you to keep a master copy on your computer that can be copied to new HD-P2 media before heading to the field. HD-P2 Conform Application The HD-P2 includes a standalone application supported by both Windows XP and Mac OS 10.3 for conforming (or rendering) a project into a single audio file. The application reads in the audio files for a selected project (all files must share the same sample rate), evaluates the timeline position and file creation date & time for each audio file, and writes out the "flattened" or "conformed" audio into a single file. The file can be saved with 16- or 24-bit sample depth and in Stereo, Dual Mono, Mono Left, Mono Right, or Mono Summed (L+R) formats. Various application uses follow: Choose Project Using file dialog navigate to the project and click puter as an externally mounted FireWire hard drive. On the HD-P2 the screen appears as shown in Figure 34. The only way to safely un-dock the HD-P2 from the host device is to "eject" it on the host's file system. On the Macintosh this means dragging the HD-P2 disk icon to the Trash (which becomes an eject button), or clicking the eject icon next to the disk in the Finder window. On Windows you can right click the HD-P2 disk and select Eject. CAUTION While the HD-P2 is docked you should not try to remove or change the CF card. Doing so will corrupt the data on the card. Once the host computer ejects the HD-P2, the warning screen goes away, and the HD-P2 reloads the CF card just as it does on power-up and card insertion. Figure 35 - CF Disk Layout Open. Once a valid project is chosen the status line will show the start and end times of audio within, along with the size of the output file at the current settings. The Conform Project button will also be enabled. Choose Output File Setting Set the Width and Channel format you wish the output file to have. Conform Project Upon clicking this key you will be presented with a file Save As dialog. Choose where you would like the file saved and what name. An extension of .wav is required. Continued on the next page 25 TASCAM HD-P2 Owner's Manual