TEAC HD-P2 HD-P2 Owner's Manual - Page 27

Specifications Specifications Recording Media: Compact Flash, Microdrive File Format: BWF Broadcast Wave File (FAT16/FAT32) Recording time: 24 minutes (256 MB Compact Flash, Fs=44.1 kHz 16 bit stereo) Operating time: 5 Hours Sample Rates: 44.1/48/88.2/96/176.4/192 kHz Sample Clock refs: S/PDIF, Video (NTSC or PAL), LTC, WORD Quantization: 16/24 bit Pre-record buffer: Up to 10 seconds Time code types: 23.976,24,25,29,29.97 DF/NDF, 30 DF/NDF Frequency response Nominal level: 20 Hz to 20 kHz ±1.0 dB (44.1 kHz/48 kHz) MIC to LINE OUT: 20 to 40 kHz 0.5 dB/-4.0 dB (88.2 kHz/96 kHz) 20 to 80 kHz 0.5 dB/-20 dB (176.4 kHz/192 kHz) Noise level Trim Max (22 Hz to 22 kHz): Up to -55 dBu MIC to LINE OUT THD+N MAX LEVEL at 1 kHz: Up to 0.01% MIC to Line Out TRIM MIN: Up to 0.01% 22 kLPF Crosstalk at 1 kHz: Over 80 dB MIC to Monitor Out Delay: 44.1 kHz 1.5 msec 192 kHz 0.7 mesc Limiter: Attach time Up to 25 usec Release time Up to 50 msec Low Cut: High pass 100 Hz cut off -18 dB/OCT Phantom Power: +48 Volt, 10 mA Input/Output Connectors Analog I/O MIC Input Connector: XLR-3-31 type Input Impedance: 1.3 k¸ Balance Mic Input Level: -60 dBu (Trim Max) to 13.8 dBu (Trim Min) Internal Mic level: -60 dBu (Trim Max) to 13.8 dBu (Trim Min) Headroom: 16dB/22 dB (with limiter) Maximum Gain: 46.2 dB Pad: 20 dBS LINE Input Connector: RCA Pin type Input Impedance:10 k¸ Input Level: -46.2 dBV (Trim Max) to 0 dBu (Trim Min) Headroom: 16 dB Maximum Gain: 46.2 dB LINE Output Connector: RCA Pin type Input Impedance: 100 ¸ Input Level: -10 dBV Head Room: +6 dBV Headphone Output Connector: 6 TRS PHONE jack (Tip: L, Ring: R, Sleeve: GND) Output Power: 55 mW+55 mW (32 ¸) Speaker Output: 500 mW (16 ¸) Digital I/O COAXIAL INPUT/OUTPUT Connector: RCA Pin type Input Impedance: 75 ¸ Format: IEC60958 (S/PDIF) Quantization: 24 bit Other Inputs LTC INPUT Connector: XLR-3-31 Input Impedance: 75 ¸ VIDEO INPUT Connector: BNC Input Impedance: 75 ¸ KEYBOARD Connector: PS/2 FIREWIRE Connector: IEEE.1394 (6 Pin) Format: IEEE.1394 (Asynchoronous) Baud Rate: 400 Mbps Display LCD: 240x160 dots with backlight Power AC ADAPTOR Input: USA/Canada 120 V AC, 60 Hz Europe/U.K. 230 V AC, 50 Hz Australia 240 V AC, 50 Hz Output: DC12 V Rash Current: 600 mA Power Consumption: 6 W (CompactFlash) Battery 8 x AA type dry cell (NiMH recommended) Operating temperature: 0° to 35° C Dimensions (w x d x h): 245 x 188 x 60 Weight: 1.2 kg (without the batteries) Compatible Operating Systems: Windows XP and Macintosh OSX ~10.3 27 TASCAM HD-P2 Owner's Manual