TEAC R-4iNT R-4iNT Owner's Manual - Page 12

System Settings This chapter describes how to use the "System settings". Most settings and adjustments are required to be set when you first use the unit. 4 Turn the MULTI JOG to select the item you want to change, and then press the SELECT button. 1 In other than iPod mode, press and hold the MENU button for more than 2 seconds. System settings Equalizer > Network > Time/Date > Language > Factory Reset 5 Turn the MULTI JOG to change the setting, and then press the SELECT button. Hold down more than 2 sec. < In iPod mode, you can not enter the System settings. Press the Mode button to change the mode, and then press and hold the MENU button for more than 2 seconds. 2 Turn the MULTI JOG to select "Main menu", and then press the SELECT button. Repeat steps 4 and 5 as required. < The current setting is marked with a " ". < See "Available menu items and settings" below for Individual menu functions. < If no button is pressed for more than 10 seconds, current menu will be canceled and return to the previous display. 6 Press and hold the MENU button to exit the setup mode. Example: In the Internet radio mode Internet radio Last lietened Station list > Main menu > 3 Turn the MULTI JOG to select "System settings", and then press the SELECT button. < Settings are stored even when power is turned off and the unit is unplugged. Available menu items and settings Main menu iPod Auxiliary Input Sleep Alarms System settings > < If you want to return to the previous menu, press the BACK button. 12 Equalizer See "Equalizer" on page 15. Network Enable you to scan again for connection to another wireless network, or to manually configure the network parameters. Internet Wizard Proceeds to the internet wizard. PBC Wlan setup Setting the Wi-Fi Protected Setup (WPS) between the wireless access point and R-4iNT. Select WPS on the wireless access point, and then press the SELECT button on the R-4iNT.