TEAC SL-D920 SL-D920 Owner's Manual - Page 4

Contents Before Use Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Contents 4 Before Use 4 Discs 6 RESET Switch 7 Connections 8 Names of Controls 10 Remote Control 13 Basic Operation 14 Listening to a CD/MP3/WMA disc 15 Listening to MP3/WMAs (USB 16 Controlling playback (disc/USB 16 Program Playback 18 Repeat/Shuffle Playback 20 Listening to the Radio 21 Preset Tuning 22 RDS 23 RDS (PTY Search 23 Listening to an External Source 24 Before Recording 25 Recording to USB 25 Deleting a file from USB 26 Setting the Clock 27 Setting the Timer 28 Specifications 30 Troubleshooting 31 Read this before operation < As the unit might become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage that is printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the location for placement of the unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations that are subject to vibrations or excessive dust, heat, cold or moisture. < Do not place the unit on an amplifier/receiver. < Do not open the cabinet as this could result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service agency. < When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord. < To keep the laser pickup clean, do not touch it, and always close the disc tray when not using the CD player. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. < Keep this manual in a safe place for future reference. DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so could damage the disc. WHEN MOVING THIS UNIT When changing the location of placement or packing the unit for transportation, be sure to remove the disc and close the disc compartment cover. Then, press the power switch to turn the power off, and disconnect the power cord. Moving this unit with a disc loaded could result in damage to this unit. 4