TEAC SR-L50 Owners Manual - Page 15

Programmed Playback (1) 2 13 4 ENGLISH Up to 20 tracks can be programmed in the desired order. < Shuffle playback does not work during program playback. < Insert a disc and select "CD" before beginning programming. 3 Within 10 seconds, press the MEMORY/CLOCK ADJ button. The track is programmed, and "P-02" is displayed. 1 Press the MEMORY/CLOCK ADJ button in the stop mode. "MEMORY" indicator blinks, and "P-01" appears on the display. 2 Within 10 seconds, press the numeric buttons to select a track. Repeat steps 2 and 3 to program more tracks. < You can program up to 20 tracks. < You can also use the front panel buttons to select a track number. In this case, press the SKIP/SEARCH button to select a track number and then press the MEMORY/CLOCK ADJ button while "MEMORY" is blinking on the display. < To cancel the program mode, press the STOP button (H). 4 When the selection of track numbers is completed, press the PLAY/PAUSE button (y/J) to start program playback. Example 1: To select the track No.5: Example 2: To select the track No.23: < If the numeric buttons aren't pressed within 10 seconds, program mode will be canceled. If the PLAY/PAUSE button (y/J) isn't pressed within 10 seconds, the MEMORY indicator will go off. In that case, press the MEMORY/CLOCK ADJ button and then press the PLAY/PAUSE button (y/J) to start program playback. The programmed contents are kept in memory even after the FUNCTION button is pressed or the power is turned off. 15