TEAC SR-LX5i-B SR-LX5i Manual - Page 20
Timer, Setting the timer
View all TEAC SR-LX5i-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Timer 2 Press the Skip buttons (. or /) to set the hour, and then press the ALARM 1 or ALARM 2 button. .// ALARM 1, ALARM 2 < The unit can be programmed to turn on at a specified time. The unit will Standby after 120 minutes of reaching the specified time. < The unit can be set two different timer setting separately. < Adjust the clock before setting the timer (see page 11). Setting the timer 1 Press and hold the ALARM 1 or ALARM 2 button for more than 2 seconds. 3 Press the Skip buttons (. or /) to set the minute, and then press the ALARM 1 or ALARM 2 button. 4 Select a source using the Skip buttons (.//), and then press the ALARM 1 or ALARM 2 button. < To use buzzer, select " ". The clock and the Timer indicator ( or ) blinks on the display. < If no button is pressed for about 8 seconds, the timer setting mode will be canceled. 5 Set the volume using the Skip buttons (.//), and then press the ALARM 1 or ALARM 2 button. The volume for timer operation is adjustable from 5 to 40. Setting the timer is now completed. 20