TEAC US-2000 US-2000 Owner's Manual - Page 11

3 − Installation Installing the driver for Mac OS X 1 Confirm that the US-2000 is not connected to the computer. 2 Double-click the "TASCAM_US2000_Driver_x.xx. dmg" on the included CD-ROM. As the "TASCAM_ US-2000_x.xx" is created on the desktop, open the folder. 3 Dboule-click the "TASCAM_US-2000_x.xx.mpkg" in the folder to launch the installer. 4 Follow the instructions on the screen to conduct the installation. 5 Restart the computer and then connect the unit. Uninstalling the driver ª Windows There are two ways to uninstall the driver as shown below. Using the Installation CD-ROM: 1 Follow steps 1 to 4 under "Installing the driver for Windows" (See page 10.) 2 At step 5 of the procedure, click "Remove the driver". 3 Follow the instructions on the screen for the remaining procedure. Using Windows "Add or Remove Programs" : 1 Open the "Control Panel" from the "Start" menu. 2 Double click on "Add or Remove programs". 3 Select "US-2000 driver" from the list and click "Change or Remove Programs". 4 Follow the instructions on the screen for the remaining procedure. ª Mac OS X 1 Insert the CD-ROM into the PC and double click "TASCAM US-2000 Remover" icon. Frequently asked installation questions and answers (FAQ) Windows driver installation Q: When I connect the unit to a computer, the Windows "Hardware Wizard" appears and I cannot install the driver. Am I making a mistake in the installation procedures? A: Close the Windows "Hardware Wizard" and disconnect the unit. You must install the driver before connecting this unit. Insert the CD-ROM included with the product. The menu for installing the driver appears automatically. Select "Install Driver," and follow the instructions shown on the screen. If you have downloaded the driver from the TASCAM website (htt://www.tascam.com), expand the ZIP archive, launch the "setup.exe" file, and follow the instructions on the screen. Q: I loaded the installation CD-ROM into a Windows computer, but the driver installation menu does not appear. How can I access this menu? A: The automatic playback settings for the disc drive might be disabled. Open the CD-ROM using Windows Explorer, and double-click the "Autorun2.exe" file to manually open the installation menu. Settings on your computer Here are a few basic points to help you set up your computer for best performance with audio applications. • Do not run other applications. You will probably use your computer for applications other than audio, but we recommend that you avoid running other applications at the same time you are running audio programs. Processing digital audio places a considerable load on your computer. This means that if you are running other applications (especially graphics or Internet tools) at the same time as your audio application, the processing may not happen fast enough. Installing Cubase LE4 For details see the Cubase LE4 Quick Start Guide. 2 Follow the instructions on the screen for the remaining procedure. 11 TASCAM US-2000