TEAC US-2000 US-2000 Owner's Manual - Page 9

3 − Installation System requirements See the TASCAM website for updated information about OS compatibility. Windows Windows XP 32-bit SP2 or later Windows XP 64-bit SP2 or later Windows Vista 32-bit SP2 or later Windows Vista 64-bit SP2 or later Supported computer system: Windows compatible computer with a USB 2.0 port • CPU/clock: Pentium 4 1.4 GHz or faster AMD Athlon 1.4 GHz or faster (or equivalent processor) • Memory: 512 MB or more for Windows XP 32-bit and Windows Vista 32-bit 1 GB or more for Windows XP 64-bit and Windows Vista 64-bit NOTE Although this product has been checked for use with typical computers that meet the above operating requirements, we cannot guarantee that it will operate with all computers that meet these requirements. Please be aware that even under the same conditions, processing capability may vary depending on differences of the design and system. Mac OS X Supported operating system: Mac OS X 10.4.11 or later Mac OS X 10.5.6 or later Supported computer system: Apple Macintosh series equipped with a USB port as standard equipment • CPU/clock: Power PC G4 1 GHz or faster, or Intel processor • Memory: 512 MB or more Installing the driver In order to use the US-2000, you must install the appropriate driver into your computer. As described below, this is an easy process using the CD-ROM included with the US-2000. Driver are updated from time to time. You can download the most recent version of the driver from the TASCAM website . Do not connect the US-2000 to your computer before you have installed the driver. CAUTION • Handle the enclosed CD-ROM with care. If the disc becomes scratched or dirty, your computer may be unable to read it and the software cannot be installed. If the disc becomes unreadable, a fee will be charged for its replacement. • Never attempt to play the enclosed CD-ROM in a conventional audio CD player, as the resulting noise may damage your speakers or your hearing. Installing the driver for Windows NOTE • During driver installation, a warning that "this software ... has not passed Windows Logo testing" will appear. This message appears when a driver that has not received Windows Logo testing is installed. This message appears because the drivers for TASCAM products have not received Windows Logo testing. We have, however, confirmed their proper operation. If this message appears, click Continue to proceed with the installation. • During installation, you must connect, disconnect and reconnect the unit in steps 7, 8 and 9. You should complete each of these installation steps in less than one minute. Installation may fail if you take too much time. 1 Confirm that the unit and the PC are not connected by the USB cable. 2 Insert the included driver installation CD-ROM into the PC where you will install it. 3 Click the "Install Driver" button when the screen below appears. (If this screen does not appear automatically, find and open the "Autorun2.exe" program in the "Autorun" folder on the driver CD-ROM.) 4 When the language selection screen (below) appears, select the language you prefer and then click the "OK" button. 9 TASCAM US-2000