TEAC US-2000 US-2000 Owner's Manual - Page 8

2 − Names and Functions of Parts Rear panel r1MIC INPUTS These are balanced XLR-type analog mic input jacks for connecting microphones. The pin assignments of the XLR jacks are 1 = GND, 2 = HOT, and 3 = COLD. t MONO/ST switches Use these switches to set whether or not adjacent line inputs 9-10, 11-12, 13-14 are monitored in mono or as stereo pairs with odd-numbered channels (9, 11, 13) on the left and even-numbered channels (10, 12, 14) on the right. y1LINE IN jacks Use these balanced TRS phone jacks for line input sources, including keyboards and sound modules. The pin assignments are tip = HOT, and ring = COLD, and sleeve = GND. u1INSERTS jacks These are analog insert jacks (unbalanced) for the MIC/ INST IN inputs on the front panel (7-8). Use these to connect compressors, gates and other external effects. The pin assignments are tip = SEND, ring = RECEIVE, and sleeve = GND. i1Level selection switches Use these to set the nominal input level of the line input jacks to -10 dBV or +4 dBu. o1LINE OUTPUTS These TRS phone jacks are balanced analog line outputs. Signals output from a computer connected by USB are output from these jacks. Set which signals are output using an audio application, for example, on the computer. These jacks can be connected to an external mixer or recorder, for example. The pin assignments are tip = HOT, and ring = COLD, and sleeve = GND. p1MONITOR OUTPUT jacks These TRS phone jacks are balanced analog monitoring outputs. Connect them to monitor speakers or other equipment. The pin assignments are tip = HOT, ring = COLD, and sleeve = GND. a1USB port Use the included USB cable to connect this unit to a computer (USB 2.0 compatible). s1DIGITAL OUT jack This coaxial digital output jack conforms to IEC60958-3 (S/PDIF) or AES3-2003 (AES/EBU) specifications. This jack outputs the same digital signal that is output from the LINE OUTPUTS 1/2 or LINE OUTPUTS 3/4 (set by the control panel). The digital signal format is set on the control panel. d1DIGITAL IN jack This coaxial digital input jack conforms to IEC60958-3 (S/PDIF) specifications. NOTE This unit is capable of input and output through its DIGITAL IN and OUT jacks at 24-bit/96 kHz. f1~IN connector Connect the included power cord here. 8 TASCAM US-2000