TP-Link Archer AC1900 Archer AC1900USW V1.6 User Guide - Page 64
How can I do that?, subnet. Disable Router B's DHCP function.
![]() |
View all TP-Link Archer AC1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 12 Customize Your Network Settings Visit multiple networks and servers at the same time. Router A Router B LAN: 192.168.0.1 Switch Company's server WAN: 172.30.30.100 LAN: 192.168.0.2 172.30.30.1 PC 192.168.0.100 For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my company's network. Now I have a switch and Router B. I connect the devices as shown in the following figure so that the physical connection between my PC and my company's server is established. To surf the internet and visit my company's network at the same time, I need to configure the static routing. How can I do that? 1. Change the routers' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click Add and finish the settings according to the following explanations: • Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of 60
![](/manual_guide/products/tplink-archer-ac1900-archer-ac1900usw-v16-user-guide-4b15115/64.png)