Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer AC1900 » Manual Viewer

TP-Link Archer AC1900 Archer AC1900USW V1.6 User Guide - Page 65

Specify Wireless Settings, To enable or disable the wireless function

View all TP-Link Archer AC1900 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Chapter 12 Customize Your Network Settings Router A. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1. • Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enter 255.255.255.255. • Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router's IP which sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2. • Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN/ WLAN should be selected. • Description: Enter a description for this static routing entry. 5. Click SAVE. 6. Check the Routing Table below. If you can find the entry you've set, the static routing is set successfully. Done! Open a web browser on your PC. Enter the company server's IP address to visit the company network. 12. 6. Specify Wireless Settings The router's wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. • To enable or disable the wireless function: 61

Section	Page
About This Guide	5
Get to Know About Your Router	7
1. 1. Product Overview	8
1. 2. Appearance	8
1. 2. 1. Top Panel	8
1. 2. 2. Back Panel	10
Connect the Hardware	11
2. 1. Position Your Router	12
2. 2. Connect Your Router	12
Log In to Your Router	16
Set Up Internet Connection	18
4. 1. Use Quick Setup Wizard	19
4. 2. Quick Setup Via TP-Link Tether App	20
4. 3. Manually Set Up Your Internet Connection	20
4. 4. Set Up the Router as an Access Point	23
4. 5. Set Up an IPv6 Internet Connection	23
TP-Link Cloud Service	26
5. 1. Register a TP-Link ID	27
5. 2. Change Your TP-Link ID Information	27
5. 3. Manage the User TP-Link IDs	28
5. 3. 1. Add TP-Link ID to Manage the Router	29
5. 3. 2. Remove TP-Link ID(s) from Managing the Router	29
5. 4. Manage the Router via the TP-Link Tether App	30
OneMesh with Seamless Roaming	31
6. 1. Set Up a OneMesh Network	32
6. 2. Manage Devices in the OneMesh Network	34
Guest Network	36
7. 1. Create a Network for Guests	37
7. 2. Customize Guest Network Options	38
Parental Controls	39
8. 1. Setting Up Access Restrictions	40
QoS	43
Network Security	45
10. 1. Protect the Network from Cyber Attacks	46
10. 2. Access Control	46
10. 3. IP & MAC Binding	48
10. 4. ALG (Application Layer Gateway)	50
NAT Forwarding	51
11. 1. Share Local Resources on the Internet by Port Forwarding	52
11. 2. Open Ports Dynamically by Port Triggering	54
11. 3. Make Xbox Online Games Run Smoothly by UPnP	55
11. 4. Make Applications Free from Port Restriction by DMZ	56
Customize Your Network Settings	58
12. 1. Change the LAN Settings	59
12. 2. Configure to Support IPTV Service	59
12. 3. Specify DHCP Server Settings	61
12. 4. Set Up a Dynamic DNS Service Account	62
12. 5. Create Static Routes	63
12. 6. Specify Wireless Settings	65
12. 7. Schedule Your Wireless Function	67
12. 8. Use WPS for Wireless Connection	68
12. 8. 1. Connect via the Client’s PIN	68
12. 8. 2. Connect via the Router’s PIN	68
12. 8. 3. Push the WPS Button	69
12. 9. Advanced Wireless Settings	69
12. 10. WDS Bridging	71
Manage the Router	73
13. 1. Upgrade the Firmware	74
13. 1. 1. Auto Update	74
13. 1. 2. Online Upgrade	74
13. 1. 3. Local Upgrade	75
13. 2. Backup and Restore Configuration Settings	75
13. 3. Change the Login Password	77
13. 4. Local Management	77
13. 5. Remote Management	79
13. 6. HTTP Referer Head Check	80
13. 7. View System Log	80
13. 8. CWMP Settings	81
13. 9. Test the Network Connectivity	82
13. 10. Set Up System Time & Language	83
13. 11. Set the Router to Reboot Regularly	85
13. 12. Control the LED	86