TP-Link Archer AX3200 Archer AX3200US V1 User Guide - Page 103
Wait another 1 or 2 minutes and check the internet access., from the router.
View all TP-Link Archer AX3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
• Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. • Upgrade the firmware of the router. • Check the TCP/IP settings on the particular device if all other devices can get internet from the router. As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below and try again: • Make sure the physical connection between the router and the modem is proper. • Clone the MAC address of your computer. 99
99
• Restart the modem and the router.
1 )
Power off your modem and router, and leave them off for 1 minute.
2 )
Power on your modem first, and wait about 2 minutes until it gets a solid cable
or Internet light.
3 )
Power on the router.
4 )
Wait another 1 or 2 minutes and check the internet access.
• Reset the router to factory default settings and reconfigure the router.
• Upgrade the firmware of the router.
• Check the TCP/IP settings on the particular device if all other devices can get internet
from the router.
As the picture below shows, if the IP Address is 0°0°0°0, please try the methods below
and try again:
• Make sure the physical connection between the router and the modem is proper.
• Clone the MAC address of your computer.