TP-Link Archer AX3200 Archer AX3200US V1 User Guide - Page 73
Specify DHCP Server Settings, By default
![]() |
View all TP-Link Archer AX3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 13 Customize Your Network Settings 13. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns: 1. Tick the Enable checkbox. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click SAVE. • To reserve an IP address for a specified client device: 1. Click Add in the Address Reservation section. 69
![](/manual_guide/products/tplink-archer-ax3200-archer-ax3200us-v1-user-guide-df1b7a3/73.png)