TP-Link Archer AX6000 Archer AX6000US V1 User Guide - Page 109
Enter 8.8.8.8 as Primary DNS, click, Advanced, Network, DHCP Server
View all TP-Link Archer AX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
• Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. • Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. 105
105
• Your computer might not recognize any DNS server addresses. Please manually
configure the DNS server.
1 ) Go to
Advanced
>
Network
>
DHCP Server
.
2 )
Enter 8.8.8.8 as Primary DNS, click
Save
.
Tips:
8.8.8.8 is a safe and public DNS server operated by Google.
• Restart the modem and the router.
1 )
Power off your modem and router, and leave them off for 1 minute.
2 )
Power on your modem first, and wait about 2 minutes until it gets a solid cable
or Internet light.
3 )
Power on the router.
4 )
Wait another 1 or 2 minutes and check the internet access.
• Reset the router to factory default settings and reconfigure the router.