TP-Link Archer AX6000 Archer AX6000US V1 User Guide - Page 12
Smart Device, Computer, minutes, Method 1: Wired, Method 2: Wirelessly, Method 3: Use the WPS button
View all TP-Link Archer AX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 2 Connect the Hardware 1. Connect the modem to the router's WAN port with an Ethernet cable. 2. Turn on the modem, and then wait about 2 minutes for it to restart. 3. Connect the power adapter to the router and turn on the router. 4. Verify the LED on the top is solid on (red or blue) before moving on. Note: If the LED is off, press the LED button for about 1 second, and then check the LED again. 5. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Smart Device < Settings Wi-Fi Wireless Network Connection Wi-Fi TP-Link_XXXX TP-Link_XXXX_5G CHOOSE A NETWORK... OR TP-Link_XXXX Connect automatically Connect TP-Link_XXXX_5G Other... • Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router through this method. Note: • WPS is not supported by iOS devices. • The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1 ) Tap the WPS icon on the device's screen. Here we take an Android phone for instance. 8