TP-Link Archer AX6000 Archer AX6000US V1 User Guide - Page 23
Set Up an IPv6 Internet Connection, PPPoE, Dynamic IPSLAAC/DHCPv6, Static IP, 6to4 tunnel
View all TP-Link Archer AX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 4 Set Up Internet Connection 6. Confirm the information and click Save. Now, you can enjoy Wi-Fi. Tips: • Functions, such as Parental Controls, Qos and NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the same as those in the Router mode. 4. 5. Set Up an IPv6 Internet Connection Your ISP provides information about one of the following IPv6 internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP. Tips: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 4. Fill in information as required by different connection types. Red blanks must be filled in. 1 ) Static IP: Fill in blanks and click Save. 19