Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer Air R5 » Manual Viewer

TP-Link Archer Air R5 Archer Air R5US V1.6 User Guide - Page 75

Specify DHCP Server Settings, By default

View all TP-Link Archer Air R5 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Chapter 13 Customize Your Network Settings 5 ) Connect the set-top box to the LAN port. Done! Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV. 13. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns: 1. Tick the Enable checkbox. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click SAVE. • To reserve an IP address for a specified client device: 1. Click Add in the Address Reservation section. 71

Section	Page
About This Guide	5
Get to Know About Your Router	7
1. 1. Product Overview	8
1. 2. Appearance	8
1. 2. 1. Front Panel	8
1. 2. 2. Back Panel	9
Connect the Hardware	10
2. 1. Position Your Router	11
2. 2. Connect Your Router	11
2. 3. Mount the Router	12
Log In to Your Router	14
Set Up Internet Connection	16
4. 1. Use Quick Setup Wizard	17
4. 2. Quick Setup Via TP-Link Tether App	17
4. 3. Manually Set Up Your Internet Connection	18
4. 4. Set Up the Router as an Access Point	21
4. 5. Set Up an IPv6 Internet Connection	21
TP-Link Cloud Service	25
5. 1. Register a TP-Link ID	26
5. 2. Change Your TP-Link ID Information	26
5. 3. Manage the User TP-Link IDs	27
5. 3. 1. Add TP-Link ID to Manage the Router	28
5. 3. 2. Remove TP-Link ID(s) from Managing the Router	28
5. 4. Manage the Router via the TP-Link Tether App	29
Wireless Settings	30
6. 1. Specify Wireless Settings	31
6. 2. Schedule Your Wireless Function	33
6. 3. Use WPS for Wireless Connection	34
6. 3. 1. Connect via the Client’s PIN	34
6. 3. 2. Connect via the Router’s PIN	34
6. 3. 3. Push the WPS Button	35
6. 4. Advanced Wireless Settings	35
6. 5. Smart Antenna	37
Guest Network	38
7. 1. Create a Network for Guests	39
7. 2. Customize Guest Network Options	40
HomeShield	41
8. 1. Network Security	42
8. 2. Parental Controls	42
8. 3. Network Analysis & Optimization	43
EasyMesh with Seamless Roaming	45
9. 1. Add a Router as a Satellite Device	46
9. 2. Add a Range Extender as a Satellite Device	47
9. 3. Manage Devices in the EasyMesh Network	49
Network Security	50
10. 1. Protect the Network from Cyber Attacks	51
10. 2. Access Control	51
10. 3. IP & MAC Binding	53
10. 4. ALG	55
NAT Forwarding	57
11. 1. Share Local Resources on the Internet by Port Forwarding	58
11. 2. Open Ports Dynamically by Port Triggering	60
11. 3. Make Applications Free from Port Restriction by DMZ	61
11. 4. Make Xbox Online Games Run Smoothly by UPnP	62
VPN Server	64
12. 1. Use OpenVPN to Access Your Home Network	65
12. 2. Use PPTP VPN to Access Your Home Network	66
Customize Your Network Settings	72
13. 1. Change the LAN Settings	73
13. 2. Configure to Support IPTV Service	73
13. 3. Specify DHCP Server Settings	75
13. 4. Set Up a Dynamic DNS Service Account	76
13. 5. Create Static Routes	78
Manage the Router	81
14. 1. Upgrade the Firmware	82
14. 1. 1. Auto Update	82
14. 1. 2. Online Upgrade	82
14. 1. 3. Local Upgrade	83
14. 2. Backup and Restore Configuration Settings	84
14. 3. Change the Login Password	85
14. 4. Password Recovery	86
14. 5. Local Management	87
14. 6. Remote Management	88
14. 7. System Log	90
14. 8. Test the Network Connectivity	92
14. 9. Set System Time and Language	94
14. 10. Set the Router to Reboot Regularly	96
14. 11. Control the LED	97