TP-Link Archer Air R5 Archer Air R5US V1.6 User Guide - Page 78
Create Static Routes, subnet. Disable Router B's DHCP function.
View all TP-Link Archer Air R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Chapter 13 Customize Your Network Settings 13. 5. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to: Visit multiple networks and servers at the same time. For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my company's network. Now I have a switch and Router B. I connect the devices as shown in the following figure so that the physical connection between my PC and my company's server is established. To surf the internet and visit my company's network at the same time, I need to configure the static routing. Router A Router B Company's server LAN: 192.168.0.1 Switch WAN: 172.30.30.100 LAN: 192.168.0.2 172.30.30.1 PC 192.168.0.100 How can I do that? 1. Change the routers' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click Add and finish the settings according to the following explanations: 74