TP-Link Archer BE800 Archer BE800US V1.6 User Guide - Page 109
Advanced, Network, IPTV/VLAN, IGMP Proxy, IGMP Snooping, IGMP Version, Enable IPTV/VLAN, Bridge
![]() |
View all TP-Link Archer BE800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 15 Customize Your Network Settings 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > IPTV/VLAN. 3. If your ISP provides the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK: 1 ) Tick the IGMP Proxy and IGMP Snooping checkbox, then select the IGMP Version, either V2 or V3, as required by your ISP. 2 ) Click SAVE. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the router's Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 ) Tick Enable IPTV/VLAN. 2 ) Select the appropriate Mode according to your ISP. • Select Bridge if your ISP is not listed and no other parameters are required. • Select Custom if your ISP is not listed but provides necessary parameters. 3 ) After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 105
![](/manual_guide/products/tplink-archer-be800-archer-be800us-v16-user-guide-0014a34/109.png)