TP-Link Archer C5 Archer C5 V2 User Guide - Page 18
Connecting the router, 2.1 System Requirements, 2.2 Installation Environment Requirements
View all TP-Link Archer C5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Archer C5 AC1200 Wireless Dual Band Gigabit Router Chapter 2. Connecting the router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is connected directly to the Ethernet) PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari 2.2 Installation Environment Requirements Place the router in a well-ventilated place far from any heater or heating vent Avoid direct irradiation of any strong light (such as sunlight) Keep at least 2 inches (5 cm) of clear space around the router Operating Temperature: 0℃~40℃ (32℉~104℉) Operating Humidity: 10%~90%RH, Non-condensing 2.3 Connecting the router Before installing the router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the router according to the following steps. Don't forget to pull out the power plug and keep your hands dry. 1. Power off your modem and disconnect your existing router if you have one. (If the modem has a backup battery, please remove it too.) 2. Use an Ethernet cable to connect the Internet (blue) port of the router to the modem's LAN port. 3. Use another Ethernet cable to connect your computer to one of the Ethernet ports (yellow) labeled 1/2/3/4 on your router. 4. Turn on your modem and wait for 2 mintues. (Replace the battery if you removed it previously.) 5. Plug the supplied power adapter into the Power jack, and then press the On/Off button to turn on the router and wait for 1 minute. - 7 -