TP-Link Pharos Control PharosControl User Guide - Page 32
Upgrade the Devices, Manage Firmware Files
View all TP-Link Pharos Control manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Distance Settings AP Isolation Specify the distance between AP and Station. If this device serves as a client, the value is the distance between this device and the root AP. If this device serves as an AP, the value is the distance between the farthest client and this AP. You can manually enter the value or enable the Auto option. Manual: Enter the distance manually in the input box. The value is limited to 0-200km, and we recommend you set the value to 110% of the real distance. Auto: Check the Auto option, then the system will dynamically detect the distance. This function is available only when the distance is less than xx kilometers. The value xx varies according to the channel width you set. CPE210 does not support this option. Enable or disable AP Isolation. AP Isolation is used to isolate all wireless stations connected to this device so that they cannot communicate with each other. This function will be disabled if WDS/Bridge is enabled. Upgrade the Devices Follow the steps below to upgrade the devices. 1. Import the firmware files. For details, refer to Manage Firmware Files. 2. Select your desired device and click . If you want to upgrade devices in batch, make sure that these devices can be upgraded with the same firmware file. 29