TP-Link RE200 RE200(EU) V1 UG - Page 13

Connecting the Device

Get TP-Link RE200 PDF manuals and user guides View all TP-Link RE200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

RE200 AC750 WiFi Range Extender User Guide z Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above. z Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉). z Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing). 2.3 Connecting the Device Figure 2-1 Typical connection of RE200 To establish a typical connection of the Range Extender, please take the following steps: 1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable. 2. Plug your RE200 directly to a standard electrical wall socket, which is near the Wireless router. 3. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to RE200 wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable. 4. Log in the web-based management page of RE200 and complete the configurations. (Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device for the configurations, as you need.) Through the web page configuration you can successfully connect RE200 to the wireless router. 5. Adjust an ideal location for RE200. (Please refer to Section 2.1 Before You Begin for detailed information about ideal location.) 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
RE200
AC750 WiFi Range Extender User Guide
z
Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
z
Operating temperature of the Range Extender should be 0
℃
~40
℃
(32
℉
~104
℉
).
z
Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
2.3
Connecting the Device
Figure 2-1 Typical connection of RE200
To establish a typical connection of the Range Extender, please take the following steps:
1.
Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2.
Plug your RE200 directly to a standard electrical wall socket, which is near the Wireless router.
3.
Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to RE200 wirelessly.
Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable.
4.
Log in the web-based management page of RE200 and complete the configurations.
(Please refer to
Chapter 3 Quick Installation Guide
or
Chapter 4 Configure the Device
for the
configurations, as you need.) Through the web page configuration you can successfully
connect RE200 to the wireless router.
5.
Adjust an ideal location for RE200. (Please refer to Section
2.1 Before You Begin
for detailed
information about ideal location.)
5