TP-Link T1500G-10PS T1500G-10PSUN V1 CLI Reference Guide Guide - Page 157

Parameter port-list -- The list of Ethernet ports. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. User Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface range gigabitEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: T1500G-10MPS(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 16.3 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. 144