TP-Link T1500G-10PS T1500G-10PSUN V1 CLI Reference Guide Guide - Page 31

2.4 enable password Description The enable password command is used to set or change the password for users to access Privileged EXEC Mode from User EXEC Mode. To remove the password, please use no enable password command. This command uses the symmetric encryption. Syntax enable password { [ 0 ] password | 7 encrypted-password } no enable password Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- Super password, a string from 1 to 31 alphanumeric characters or symbols. The password is case sensitive, allows digits, English letters (case sensitive), underlines and sixteen special characters By default, it is empty. 7 -- Indicates a symmetric encrypted password with fixed length will follow. encrypted-password -- A symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines If the password you configured here is unencrypted and the global encryption function is enabled in service password-encryption, the password in the configuration file will be displayed in the symmetric encrypted form. 18