TP-Link T1600G-52TSTL-SG2452 T1600G-28TS V1 Installation Guide - Page 6

JetStream Gigabit Smart Switch LED Status On 1000Mbps Off Indication A 1000Mbps device is connected to the corresponding port. A 10/100Mbps device or no device is connected to the corresponding port. Reset Press this button for 5 seconds or above to reset the software setting back to factory default settings. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED. SFP Port Designed to install the SFP module. T1600G-28TS features 4 individual SFP ports and supports 1000M SFP module connection only. The front panel of T1600G-52TS is shown as the following figure. RESET LEDs 10/100/1000Mbps RJ45 Port SFP Port Figure 1-2 Front Panel of T1600G-52TS Reset Press this button for 5 seconds or above to reset the software setting back to factory default settings. LEDs LED PWR SYS Status On Off Flashing Flashing On/Off Indication The switch is powered on. The switch is powered off or power supply is abnormal. Power supply is abnormal. The switch works properly. The switch works improperly. 02 Introduction