TP-Link T1600G-52TSTL-SG2452 T1600G-28TS V1 Installation Guide - Page 7

JetStream Gigabit Smart Switch LED Status Indication 10/100/ 1000Mbps (port 1-48) On Green A 1000Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. On Yellow A 10/100Mbps device is connected to the corresponding port, but no activity. Flashing Data is being transmitted or received. Off No device is connected to the corresponding port. On Link/Act (port 49-52) Flashing Off There is a device linked to the corresponding SFP port but no activity. The corresponding SFP port is transmitting or receiving data. There is no device linked to the corresponding SFP port. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED. SFP Port Designed to install the SFP module. T1600G-52TS features 4 individual SFP ports and supports 1000M SFP module connection only. Port Feature Model T1600G-28TS T1600G-52TS 10/100/1000Mbps RJ45 Port 24 48 SFP Port 4 4 ■■ Rear Panel The rear panel of T1600G-28TS/T1600G-52TS features a Kensington security slot, a grounding terminal and a power socket. Here we take T1600G-28TS for example. Power Socket Grounding Terminal Kensington Security Slot Figure 1-3 Rear Panel Kensington Security Slot Secure the lock (not provided) into the security slot to prevent the device from being stolen. Introduction 03