TP-Link T2500G-10TSTL-SG3210 T2500G-10TSUN V1 User Guide - Page 224
RADIUS Server Config
View all TP-Link T2500G-10TSTL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
12.5.3 RADIUS Server Config This page is used to configure the authentication servers running the RADIUS security protocols. Choose the menu Network Security→AAA→RADIUS Conifg to load the following page. Figure 12-3 RADIUS Server Config Configuration Procedure: Configure the RADIUS server's IP and other relevant parameters under the Server Config. View, edit and delete the configured RADIUS servers in the Server list. Entry Description: Server IP: Shared Key: Auth Port: Acct Port: Retransmit: Timeout: Enter the IP of the server running the RADIUS secure protocol. Enter the shared key between the RADIUS server and the switch. The RADIUS server and the switch use the key string to encrypt passwords and exchange responses. Specify the UDP destination port on the RADIUS server for authentication requests. Specify the UDP destination port on the RADIUS server for accounting requests. Specify the number of times a request is resent to a server if the server does not respond. Specify the time interval that the switch waits for the server to reply before resending. 214