TP-Link T3700G-52TQ T3700G-52TQUN V1 CLI Reference Guide Guide - Page 317

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide Syntax snmp-server community name { read-only | read-write } [ mib-view ] no snmp-server community name Parameter name -- Community Name, ranging from 1 to 16 characters. read-only | read-write -- The access rights of the community, with "read-only" and "read-write" options. mib-view -- The MIB View for the community to access. By default, it is Default. Command Mode Global Configuration Mode Example Add community public, and the community has read-write management right to View Default: T3700G-52TQ(config)#snmp-server community public read-write Default 35.5 snmp-server host Description The snmp-server host command is used to add Notification. To delete the corresponding Notification, please use no snmp-server host command. With the Notification function enabled, the switch can initiatively report to the management station about the important events that occur on the Views, which allows the management station to monitor and process the events in time. Syntax snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 } ] [slev { noAuthNoPriv | authNoPriv | authPriv }] [type { trap | inform }] [retries retries ] [timeout timeout ] no snmp-server host ip user-name Parameter ip -- The IP address of the management Host. udp-port -- UDP port, which is used to send notifications. The UDP port functions with the IP address for the notification sending. By default, it is 162. user-name -- The User name of the management station. 294