TP-Link T3700G-52TQ T3700G-52TQUN V1 CLI Reference Guide Guide - Page 433

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide any optional parameters. To restore the certain parameters to default values, please use the no area nssa command with corresponding parameters. Syntax area area-id nssa [ no-redistribution ] [ no-summary ] [ default-information-originate [ metric cost ] [ metric-type type ]] no area area-id nssa [ no-redistribution ] [ no-summary ] [ default-information-originate [ metric cost ] [ metric-type type ]] Parameter area-id -- The area ID, in the format of an IP address in dotted decimal notation or decimal value ranging from 0 to 4294967295. no-redistribution -- Select to not import routes into the NSSA. no-summary -- Select to not send summary LSAs into the NSSA. default-information-originate -- Select on an ABR to allow importing default route as type 7 LSAs into the NSSA. cost-- The default route cost with the default value as 1. It ranges from 1 to 16777214. type-- The default route type with the default value as 2. It is either 1 or 2. Command Mode Router Configuration Mode Example Configure Area 1 as a total NSSA area: T3700G-52TQ(config)# router ospf 1 T3700G-52TQ(config-router)# area 1 nssa no-summary 46.17 area default-cost Description The area default-cost command is to configure the cost of default summary route sent from ABR to STUB or NSSA area. Syntax area area-id default-cost cost 410