TP-Link TD-W8961N TD-W8961N V1 User Guide 1910010964 - Page 16
TD-W8961N, Step 2, Method two
View all TP-Link TD-W8961N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Method two:You can use a separate splitter. External splitter can divide the data and voice, and then you can access the Internet and make calls at the same time. The external splitter has three ports: • LINE: Connect to the wall jack • PHONE: Connect to the phone sets • MODEM: Connect to the ADSL port of TD-W8961N Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of TD-W8961N. Connect the other end to the MODEM port of the external splitter. Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer's Ethernet port or a regular hub/switch port, and the other end to the LAN port on the TD-W8961N. Step 3: Power on the computers and LAN devices. Step 4: Attach the power adapter. Connect the power adapter to the power connector on the rear of the device and plug in the adapter to a electrical outlet or power extension. The electrical outlet shall be installed near the device and shall be easily accessible. Figure 2-4 8