TP-Link TL-PA210KIT User Guide - Page 27

Appendix A: Troubleshooting Guide, TL-PA210, The Power LED, does not light up., The Ethernet LED - mini powerline ethernet adapter

Get TP-Link TL-PA210KIT PDF manuals and user guides View all TP-Link TL-PA210KIT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

TL-PA210 AV200 Mini Powerline Adapter Appendix A: Troubleshooting Guide The Troubleshooting Guide provides answers to common problems regarding the Powerline Adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the Powerline Adapter is properly plugged into a power outlet. b) Make sure the power outlet is active (working) by plugging another electric device into it. c) Re-plug the Powerline Adapter to the power outlet again. If the Power LED still failed to light up, contact your local dealer for technical support. 2. The Ethernet LED does not light up. Ans. Check the following: 1. Make sure that the Ethernet cable (RJ-45) is properly connected to the Powerline Adapter's Ethernet port. 2. Make sure that the other end of the Ethernet cable (RJ-45) is properly connected to the computer LAN card or to you Cable/xDSL Ethernet port. 3. Make sure your computer LAN card is properly installed and configured. 4. Make sure your Cable/xDSL broadband access is working and configured correctly. 5. Contact your local dealer for technical support if the Ethernet LED still failed to lights up after the above procedures. 3. The Powerline LED does not light up. Ans. Check the following: 1. Double click to enable the Management Utility and click the "Scan" tab under the Main configuration homepage. The Management Utility will automatically detect all other Powerline Adapter on your power line network. 2. Try to plug a second Powerline Adapter into a near by power outlet and check whether the Powerline LED lights up or not. 3. Contact your local dealer for technical support if the Powerline LED still failed to lights up after the above procedures. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
TL-PA210
AV200 Mini Powerline Adapter
22
Appendix A: Troubleshooting Guide
The Troubleshooting Guide provides answers to common problems regarding the Powerline Adapter.
1. The Power LED
does not light up.
Ans.
Check the following:
a) Make sure that the Powerline Adapter is properly plugged into a power outlet.
b) Make sure the power outlet is active (working) by plugging another electric device into it.
c) Re-plug the Powerline Adapter to the power outlet again. If the Power LED still failed to light up,
contact your local dealer for technical support.
2. The Ethernet LED
does not light up.
Ans.
Check the following:
1.
Make sure that the Ethernet cable (RJ-45) is properly connected to the Powerline Adapter’s
Ethernet port.
2.
Make sure that the other end of the Ethernet cable (RJ-45) is properly connected to the
computer LAN card or to you Cable/xDSL Ethernet port.
3.
Make sure your computer LAN card is properly installed and configured.
4.
Make sure your Cable/xDSL broadband access is working and configured correctly.
5.
Contact your local dealer for technical support if the Ethernet LED still failed to lights up after
the above procedures.
3. The Powerline LED
does not light up.
Ans.
Check the following:
1. Double click to enable the Management Utility and click the
“Scan”
tab under the
Main
configuration homepage. The Management Utility will automatically detect all other Powerline
Adapter on your power line network.
2. Try to plug a second Powerline Adapter into a near by power outlet and check whether the
Powerline LED lights up or not.
3. Contact your local dealer for technical support if the Powerline LED still failed to lights up after
the above procedures.