TP-Link TL-PA7020P KIT TL-PA7020P KIT V1 User Guide - Page 25
Appendix A: Troubleshooting, TL-PA7020P, The Power LED, does not light up., Rescan, Network
View all TP-Link TL-PA7020P KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the powerline adapter. 1. The Power LED does not light up. Ans. Check the following: 1. Make sure that the powerline adapter is properly plugged into a power outlet. 2. Make sure the power outlet is active (working) by plugging another electric device into it. 3. Re-plug the powerline adapter to the power outlet. If the Power LED still fails to light up, contact your local dealer for technical support. 2. The Powerline LED does not light up. Ans. Check the following: 1. Double click to enable the Management Utility and click the "Rescan" button under the Network configuration homepage. The Management Utility will automatically detect all other powerline adapters on your powerline network. 2. Try to plug a second powerline adapter into a nearby power outlet and check whether the Powerline LED lights up or not. 3. Contact your local dealer for technical support if the Powerline LED still fails to light up after the above procedures. 3. The Ethernet LED does not light up. Ans. Check the following: 1. Make sure that the Ethernet cable (RJ45) is properly connected to the Ethernet port of the power line adapter. 2. Make sure that the other end of the Ethernet cable (RJ45) is properly connected to the computer LAN card or to your Cable/xDSL Ethernet port. 3. Make sure your computer LAN card is properly installed and configured. 4. Make sure your Cable/xDSL broadband access is working and configured correctly. 5. Contact your local dealer for technical support if the Ethernet LED still fails to light up after the above procedures. 19