TP-Link TL-SG1024S Unmanaged/Easy Smart Rackmountable Switch Installation Guid - Page 16
Rack Installation
View all TP-Link TL-SG1024S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Unmanaged/Easy Smart Rackmountable Switches 1. Set the device on a flat surface which is strong enough to support the entire weight of the device with all fittings. 2. Remove the adhesive backing papers from the rubber feet. 3. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device. Figure 2-1 Desktop Installation Feet Bottom of the Device Notch ■■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1. Check the efficiency of the grounding system and the stability of the rack. 2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws, as illustrated in the following figure. Figure 2-2 Bracket Installation Rack-mounting Bracket Screw 3. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack, as illustrated in the following figure. Figure 2-3 Rack Installation Rack Caution: ■■ Leave 5 to 10 cm gaps around the devices for air circulation. ■■ Avoid placing heavy things on the device. ■■ Mount devices in sequence from the bottom to top of the rack and ensure a certain clearance between devices for the purpose of heat dissipation. 12 Installation