TP-Link TL-SG3216 TL-SG3216 V1 CLI Reference Guide - Page 109

system-time manual, ip address

Page 109 highlights

system-time gmt {time-zone} {ntp-server} {backup-ntp-server} no system-time gmt {time-zone} {ntp-server} {backup-ntp-server} Parameter time-zone -- Your local time-zone, and it ranges from -12 to 13. ntp-server -- The IP Address for the Primary NTP Server. Backup-ntp-server -- The IP Address for the Secondary NTP Server. Command Mode Global Configuration Mode Example Configure the system time mode as gmt, the time zone is -12, the primary ntp server is 133.100.9.2 and the secondary ntp server is 139.78.100.163: TP-LINK(config)# system-time gmt -12 133.100.9.2 139.78.100.163 system-time manual Description The system-time manual command is used to configure the system time manually. To clear all the information, please use no system-time manual command. Syntax system-time manual {time } no system-time manual {time } Parameter time -- Set the date and time manually, MM/DD/YYYY-HH:MM:SS Command Mode Global Configuration Mode Example Configure the system mode as manual, and the time is 12/20/2010 17:30:35 TP-LINK(config)# system-time manual 12/20/2010-17:30:35 ip address Description The ip address command is used to configure the IP Address, Subnet Mask and Default Gateway. To restore to the factory defaults, please use no ip 98

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191

98
system-time gmt
{
time-zone
} {
ntp-server
}
{
backup-ntp-server
}
no system-time gmt
{
time-zone
} {
ntp-server
}
{
backup-ntp-server
}
Parameter
time-zone
——
Your local time-zone, and it ranges from -12 to 13.
ntp-server
——
The IP Address for the Primary NTP Server.
Backup-ntp-server
——
The IP Address for the Secondary NTP Server.
Command Mode
Global Configuration Mode
Example
Configure the system time mode as gmt, the time zone is -12, the primary ntp
server is 133.100.9.2 and the secondary ntp server is 139.78.100.163:
TP-LINK(config)# system-time gmt -12 133.100.9.2 139.78.100.163
system-time manual
Description
The
system-time manual
command is used to configure the system time
manually. To clear all the information, please use
no
system-time manual
command.
Syntax
system-time manual
{
time
}
no system-time manual
{
time
}
Parameter
time
——
Set the date and time manually, MM/DD/YYYY-HH:MM:SS
Command Mode
Global Configuration Mode
Example
Configure the system mode as manual, and the time is 12/20/2010 17:30:35
TP-LINK(config)# system-time manual 12/20/2010-17:30:35
ip address
Description
The
ip address
command is used to configure the IP Address, Subnet Mask
and Default Gateway. To restore to the factory defaults, please use
no ip