TP-Link TL-SG3216 TL-SG3216 V1 CLI Reference Guide - Page 110
ip dhcp-alloc, ip bootp-alloc
View all TP-Link TL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
address command. Syntax ip address {ip-addr} {ip-mask} [gateway] no ip address Parameter ip-addr - - The system IP of the Switch. The default system IP is 192.168.0.1. ip-mask -- The Subnet Mask of the Switch. The default Subnet Mask is 255.255.255.0. gateway -- The Default Gateway of the Switch. By default, it is empty. Command Mode Global Configuration Mode Example Configure the system IP as 192.168.0.69 and the Subnet Mask as 255.255.255.0: TP-LINK(config)# ip address 192.168.0.69 255.255.255.0 ip dhcp-alloc Description The ip dhcp-alloc command is used to enable the DHCP Client function. When this function is enabled, the switch will obtain IP from DHCP Client server. Syntax ip dhcp-alloc Command Mode Global Configuration Mode Example Enable the DHCP Client function: TP-LINK(config)# ip dhcp-alloc ip bootp-alloc Description The ip bootp-alloc command is used to obtain IP address from BOOTP Server. 99