TP-Link TL-SG3216 TL-SG3216 V1 CLI Reference Guide - Page 50
lacp admin-key, lacp system-priority
View all TP-Link TL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Enable LACP protocol on the port 1: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# lacp lacp admin-key Description The lacp admin-key command is used to configure the admin key. To restore to the default value, please use no lacp admin-key command. Syntax lacp admin-key value no lacp admin-key Parameter value -- admin key, ranging from 0 to 65535. By default, the value is 1. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the admin key of port 1 as 1024: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# lacp admin-key 1024 lacp system-priority Description The lacp system-priority command is used to set the system priority for a port. To restore to the default priority, please use no lacp system-priority command. Syntax lacp system-priority value no lacp system-priority Parameter value -- System priority, ranging from 0 to 65535. By default, the value is 39