TP-Link TL-SL1117 TL-SL1117 V2 QIG 7106503252

TP-Link TL-SL1117 Manual

TP-Link TL-SL1117 manual content summary:

  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 1
    User Guide TL-SL1210 8-Port 10/100Mbps + 2-Port Gigabit Switch TL-SL1117 16-Port 10/100Mbps + 1-Port Gigabit Switch TL-SL1226 24-Port 10/100Mbps + 2-Port Gigabit Switch TL-SL1351 48-Port 10/100Mbps + 3-Port Gigabit Switch Rev: 2.0.0 7106503252
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 2
    without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2010 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 3
    EC DECLARATION OF CONFORMITY (EUROPE) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/ EEC, this product meets the requirements of the following standards: ¾ EN55022 ¾ EN55024 ¾ EN60950 CE MARK WARNING This is a class A product. In a domestic environment, this product
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 4
    1 1.1 Overview of the product 1 1.2 Features 2 Chapter 2 Installation 2 2.1 Mounting the Switch on a Desk 2 2.2 Mounting the Switch in a Rack 3 2.3 Mounting the SFP Module (for TL-SL1351 Only 4 2.4 Power on 4 Chapter 3 Identifying External Components 4 3.1 Front Panel
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 5
    the TL-SL1210 / TL-SL1117 / TL-SL1226 / TL-SL1351 Gigabit Switch. TL-SL1210, TL-SL1117, TL-SL1226 and TL-SL1351 just differ in the number of LED indicators and ports, and all figures in this user guide are of TL-SL1351. 1.1 Overview of the product The TL-SL1210/TL-SL1117/TL-SL1226/TL-SL1351 Gigabit
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 6
    Auto-MDI/MDIX ¾ 1 SFP(Small Form Pluggable) module interface (For TL-SL1351 only) ¾ Supports Auto MDI / MDIX cable detection on all ports eliminate the need for crossover cable or Uplink port ¾ Non-blocking switching architecture that forwards and filters packets at full wire -speed for maximum
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 7
    Industries Association. Turn off all the equipment connected to the Switch before mounting it in the rack, then rivet the two "L" brackets onto each side of the Switch, fasten it with screws in the rack. Note: For TL-SL1210, the "L" brackets will differ in size. Figure 2-1 Rivet the 'L'brackets
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 8
    consists of a SFP module, which support The Hot Plug- And- Draw. Should fixed the SFP into SFP pluggable when use the SFP module. The switch could identify and configure the SFP module automatically. 2.4 Power on TL-SL1210/TL-SL1117/TL-SL1226/TL-SL1351 Gigabit Switch is powered by AC power supply
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 9
    connection. ¾ Link/Act LED: This indicator will light solid green when the corresponding port is connected TL-SL1351 features a power receptacle, which is an AC power receptacle. Connect the female of the power cord head here, and the male head to the AC power outlet. Figure 3-2 TL-SL1351 Switch
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 10
    of Ports IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X (for TL-SL1351 only) ANSI/IEEE Std 802.3 Nway IEEE802.3x CSMA/CD Ethernet: 10Mbps (Half Duplex), 20Mbps (FullDuplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) Gigabit
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 11
    10Base-T: 14880pps/Port Frame Filter 100Base-TX: 148810pps/Port Rate 1000Base-T: 1488095pps/Port 1000Base-X: 1488095pps/Port (for TL-SL1351 only) Frame Forward Rate 10Base-T: 14880pps/Port 100Base-TX: 148810pps/Port 1000Base-T: 1488095pps/Port 1000Base-X: 1488095pps/Port (for TL-SL1351 only
  • TP-Link TL-SL1117 | TL-SL1117 V2 QIG 7106503252 - Page 12
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

User Guide
TL-SL1210
8-Port 10/100Mbps + 2-Port Gigabit Switch
TL-SL1117
16-Port 10/100Mbps + 1-Port Gigabit Switch
TL-SL1226
24-Port 10/100Mbps + 2-Port Gigabit Switch
TL-SL1351
48-Port 10/100Mbps + 3-Port Gigabit Switch
Rev: 2.0.0
7106503252