TP-Link TL-SL1117 TL-SL1117 V2 QIG 7106503252 - Page 5
Package Contents, Introduction of the Product
View all TP-Link TL-SL1117 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Package Contents The following items should be found in your box: ¾ One Switch ¾ One power cord ¾ This User's Guide ¾ Rubber footpads for Desk-mount ¾ Rack-mount kit for installing the switch in a 19-inch rack Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Chapter 1 Introduction of the Product This chapter describes the features of the TL-SL1210 / TL-SL1117 / TL-SL1226 / TL-SL1351 Gigabit Switch. TL-SL1210, TL-SL1117, TL-SL1226 and TL-SL1351 just differ in the number of LED indicators and ports, and all figures in this user guide are of TL-SL1351. 1.1 Overview of the product The TL-SL1210/TL-SL1117/TL-SL1226/TL-SL1351 Gigabit Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections, make Gigabit connection to a server or uplink a network necessarily. The TP-LINK TL-SL1210/TL-SL1117/TL-SL1226/TL-SL1351 features a nonblocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. MAC address auto-learning and auto-aging, IEEE802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode. It is compatible with all 10,100, and 1000Mbps Ethernet devices because it is standard-based. The TL-SL1210/TL-SL1117/TL-SL1226/TL-SL1351 is plug-and-play and no configuration is required. Auto MDI/MDIX cable detection on all ports eliminate the need for crossover cable or Uplink port. Each port can be used as general ports or 1