Home » TP-Link Manuals » Hubs & Switches » TP-Link TL-SL2428 » Manual Viewer

TP-Link TL-SL2428 TL-SL2428 V1 User Guide - Page 13

Reset, 100Mbps Ports, SFP Ports, Status, Indication, Switching, Port Config

Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

 Reset: With the Switch powered on, press Reset button for five seconds to reset the software setting to its factory default settings.  10/100Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100M LED.  10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000M LED.  SFP Ports: Designed to install the SFP module. It shares LEDs with 1000Mbps ports. When a 1000Mbps SFP module is inserted into the SFP port, On (green) LED of 1000M means a device is linked to the port and Flashing (green) LED of 1000M indicates data is being transmitted or received on the port.  LEDs Name Status Indication Power On(green) The Switch is powered on. Flashing/Off The Switch is powered off or power supply is abnormal. System Flashing On/Off The Switch is working normally. The Switch is powered off or the Switch is working abnormally. On A device is linked to the corresponding port. 10/100M Flashing Green Data is being transmitted or received. The linked device is running at 100Mbps. Yellow The linked device is running at 10Mbps. On A device is linked to the corresponding port. 1000M Flashing Green Data is being transmitted or received. The linked device is running at 1000Mbps. Yellow The linked device is running at 10/100Mbps. Note: When using the SFP port with a 100M module or a gigabit module, you need log on to the GUI (Graphical User Interface) of the Switch and configure its corresponding Speed and Duplex mode on Switching→Port→Port Config page. For 100M module, please select 100MFD while select 1000MFD for gigabit module. By default, the Speed and Duplex mode of SFP port is 1000MFD. 6

Section	Page
Package Contents	8
Chapter 1 About this Guide	9
1.1 Intended Readers	9
1.2 Conventions	9
1.3 Overview of This Guide	9
Chapter 2 Introduction	12
2.1 Overview of the Switch	12
2.2 Main Features	12
2.3 Appearance Description	12
2.3.1 Front Panel	12
2.3.2 Rear Panel	14
Chapter 3 Login to the Switch	15
3.1 Login	15
3.2 Configuration	15
Chapter 4 System	17
4.1 System Info	17
4.1.1 System Summary	17
4.1.2 Device Description	19
4.1.3 System Time	20
4.1.4 Daylight Saving Time	20
4.1.5 System IP	22
4.2 User Manage	23
4.2.1 User Table	23
4.2.2 User Config	23
4.3 System Tools	25
4.3.1 Config Restore	25
4.3.2 Config Backup	25
4.3.3 Firmware Upgrade	26
4.3.4 System Reboot	27
4.3.5 System Reset	27
4.4 Access Security	27
Chapter 5 Switching	30
5.1 Port	30
5.1.1 Port Config	30
5.1.2 Port Mirror	31
5.1.3 Port Security	34
5.1.4 Port Isolation	36
5.2 LAG	37
5.2.1 LAG Table	37
5.2.2 Static LAG	39
5.3 Traffic Monitor	40
5.3.1 Traffic Summary	40
5.3.2 Traffic Statistics	41
5.4 MAC Address	43
5.4.1 Address Table	43
5.4.2 Static Address	45
5.4.3 Dynamic Address	46
5.4.4 Filtering Address	48
Chapter 6 VLAN	50
6.1 802.1Q VLAN	51
6.1.1 VLAN Config	53
6.1.2 Port Config	55
6.2 Application Example for 802.1Q VLAN	57
Chapter 7 Spanning Tree	59
7.1 STP Config	64
7.1.1 STP Config	64
7.1.2 STP Summary	66
7.2 Port Config	67
7.3 MSTP Instance	69
7.3.1 Region Config	69
7.3.2 Instance Config	70
7.3.3 Instance Port Config	71
7.4 STP Security	73
7.4.1 Port Protect	73
7.4.2 TC Protect	76
7.5 Application Example for STP Function	76
Chapter 8 Multicast	80
8.1 IGMP Snooping	82
8.1.1 Snooping Config	83
8.1.2 Port Config	84
8.1.3 VLAN Config	85
8.1.4 Multicast VLAN	87
8.2 Multicast IP	90
8.2.1 Multicast IP Table	90
8.2.2 Static Multicast IP	91
8.3 Multicast Filter	92
8.3.1 IP-Range	93
8.3.2 Port Filter	94
8.4 Packet Statistics	95
Chapter 9 QoS	97
9.1 DiffServ	100
9.1.1 Port Priority	100
9.1.2 802.1P Priority	101
9.1.3 DSCP Priority	102
9.1.4 Schedule Mode	104
9.2 Bandwidth Control	104
9.2.1 Rate Limit	105
9.2.2 Storm Control	106
Chapter 10 SNMP	108
10.1 SNMP Config	110
10.1.1 Global Config	110
10.1.2 SNMP View	111
10.1.3 SNMP Group	112
10.1.4 SNMP User	113
10.1.5 SNMP Community	115
10.2 Notification	117
10.3 RMON	119
10.3.1 History Control	120
10.3.2 Event Config	120
10.3.3 Alarm Config	121
Chapter 11 Maintenance	124
11.1 System Monitor	124
11.1.1 CPU Monitor	124
11.1.2 Memory Monitor	125
11.2 Log	125
11.2.1 Log Table	126
11.2.2 Local Log	127
11.2.3 Remote Log	127
11.2.4 Backup Log	128
11.3 Device Diagnose	129
11.3.1 Cable Test	129
11.3.2 Loopback	130
11.4 Network Diagnose	130
11.4.1 Ping	131
11.4.2 Tracert	131
Appendix A: Specifications	133
Appendix B: Configuring the PCs	134