TP-Link TL-WA860RE TL-WA860RE V1 UG 1910011037 - Page 12

Basic Requirements, 2.3 Connecting the Device - 300mbps wifi range extender

Get TP-Link TL-WA860RE PDF manuals and user guides View all TP-Link TL-WA860RE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

TL-WA860RE 300Mbps WiFi Range Extender with AC Passthrough 2.2 Basic Requirements z Place your Range Extender in a well-ventilated place far from direct sunlight, any heater or heating vent. z Leave at least 2 inches (5cm) space around the device for heat dissipation. z Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid damage. z Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above. z Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉). z Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing). 2.3 Connecting the Device Figure 2-1 Typical connection of TL-WA860RE To establish a typical connection of the Range Extender, please take the following steps: 1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable. 2. Plug your TL-WA860RE directly to a standard electrical wall socket, which is next to the Wireless router. 3. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to TL-WA860RE wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable. 4. Log in the web-based management page of TL-WA860RE and complete the configurations. (Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device for the configurations, as you need.) Through the web page configuration you can successfully connect TL-WA860RE to the wireless router. 5. Adjust an ideal location for TL-WA860RE. (Please refer to Section 2.1 Before You Begin for detailed information about ideal location.) 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
TL-WA860RE
300Mbps WiFi Range Extender with AC Passthrough
5
2.2
Basic Requirements
z
Place your Range Extender in a well-ventilated place far from direct sunlight, any heater or
heating vent.
z
Leave at least 2 inches (5cm) space around the device for heat dissipation.
z
Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid
damage.
z
Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
z
Operating temperature of the Range Extender should be 0
℃
~40
℃
(32
℉
~104
℉
).
z
Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
2.3
Connecting the Device
Figure 2-1 Typical connection of TL-WA860RE
To establish a typical connection of the Range Extender, please take the following steps:
1.
Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2. Plug your TL-WA860RE directly to a standard electrical wall socket, which is next to the
Wireless router.
3.
Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to TL-WA860RE
wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an
Ethernet cable.
4.
Log in the web-based management page of TL-WA860RE and complete the configurations.
(Please refer to
Chapter 3 Quick Installation Guide
or
Chapter 4 Configure the Device
for the
configurations, as you need.) Through the web page configuration you can successfully
connect TL-WA860RE to the wireless router.
5.
Adjust an ideal location for TL-WA860RE. (Please refer to Section
2.1 Before You Begin
for
detailed information about ideal location.)