TP-Link TL-WA860RE TL-WA860RE V1 UG 1910011037 - Page 23

DHCP Client List, 4.5 Wireless

Get TP-Link TL-WA860RE PDF manuals and user guides View all TP-Link TL-WA860RE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

TL-WA860RE 300Mbps WiFi Range Extender with AC Passthrough ¾ Address Lease Time - Enter the amount of time for the PC to connect to the Range Extender with its current assigned dynamic IP address. The time is measured in minutes. After the time is up, the PC will be automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway (optional) - Enter the IP address of the gateway for your LAN. The factory default setting is 0.0.0.0. ¾ Default Domain (optional) - Enter the domain name of the your DHCP server. You can leave the field blank. ¾ Primary DNS (optional) - Enter the DNS IP address provided by your ISP. Consult your ISP if you don't know the DNS value. The factory default setting is 0.0.0.0. ¾ Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP provides two DNS servers. The factory default setting is 0.0.0.0. Click Save to save the changes. ) Note: To use the DHCP server function of the device, you should configure all computers in the LAN as "Obtain an IP Address automatically" mode. This function will not take effect until the device reboots. 4.4.3 DHCP Client List Selecting Network > DHCP Client List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-11). Figure 4-11 DHCP Clients List ¾ ID - It displays the index of the DHCP client. ¾ Client Name - The Client Name displays the name of the DHCP client. ¾ MAC Address - The MAC Address displays the MAC address of the DHCP client. ¾ Assigned IP - The Assigned IP displays the IP address that the Range Extender has allocated to the DHCP client. ¾ Lease Time - It displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button. 4.5 Wireless The Wireless option, improving functionality and performance for wireless network, can help you make the Range Extender an ideal solution for your wireless network. Here you can create a 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
TL-WA860RE
300Mbps WiFi Range Extender with AC Passthrough
16
¾
Address Lease Time -
Enter the amount of time for the PC to connect to the Range Extender
with its current assigned dynamic IP address. The time is measured in minutes. After the time
is up, the PC will be automatically assigned a new dynamic IP address. The range of the time
is 1 ~ 2880 minutes. The default value is 120 minutes.
¾
Default Gateway (optional) -
Enter the IP address of the gateway for your LAN. The factory
default setting is 0.0.0.0.
¾
Default Domain (optional) -
Enter the domain name of the your DHCP server. You can leave
the field blank.
¾
Primary DNS (optional) -
Enter the DNS IP address provided by your ISP. Consult your ISP
if you don’t know the DNS value. The factory default setting is 0.0.0.0.
¾
Secondary DNS (optional) -
Enter the IP address of another DNS server if your ISP provides
two DNS servers. The factory default setting is 0.0.0.0.
Click
Save
to save the changes.
)
Note:
To use the DHCP server function of the device, you should configure all computers in the LAN as
"Obtain an IP Address automatically" mode. This function will not take effect until the device
reboots.
4.4.3 DHCP Client List
Selecting
Network
>
DHCP Client List
will enable you to view the Client Name
,
MAC Address,
Assigned IP
and
Lease Time for each DHCP Client attached to the device (Figure 4-11).
Figure 4-11 DHCP Clients List
¾
ID
–
It displays the index of the DHCP client.
¾
Client Name –
The Client Name displays the name of the DHCP client.
¾
MAC Address –
The MAC Address displays the MAC address of the DHCP client.
¾
Assigned IP –
The Assigned IP displays the IP address that the Range Extender has
allocated to the DHCP client.
¾
Lease Time
-
It displays the time of the DHCP client leased. Before the time is up, DHCP
client will request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the
Refresh
button.
4.5
Wireless
The
Wireless
option, improving functionality and performance for wireless network, can help you
make the Range Extender an ideal solution for your wireless network. Here you can create a